Systems Development and Solutions, high Voltage Power Supply Components
Systems Development and Solutions, high Voltage Power Supply Components
Systems Development and Solutions, high Voltage Power Supply Components
Non instrumented blocs
Non Instrumented High Voltage Power Supplies in Block Configuration

This category of compact, modular, high voltage DC-DC power supplies is recommended where cost and space restrictions are important. The 5 product lines in this category are configured as non-instrumented blocs that are intended to be integrated into the customer’s equipment. According to the model, they deliver output powers that can reach 100W. In most cases, they are powered at 24Vdc generating from one to three high voltage outputs that can reach 25kVdc. Each model can be programmed internally or externally and allows output voltage monitoring. Standard features include extremely reduced low line and load regulation, low ripple, good stability, and continuous short circuit protection. These products are completely or partially encapsulated in a specific resin.
 
FBA SERIES
 
PCB-mount high efficiency flyback converter
8 standard models
FBA Series - Miniature PCB-Mountable
POSSIBLE APPLICATIONS

- Piezo Devices
- General Purpose Applications
Standard Range Electrical Characteristics :
INPUT VOLTAGE
24Vdc
OUTPUT VOLTAGE

0 to 300V through 0 to 400V
FBA Series PDF (1799 Ko)
FBA Series, get a quote here
OUTPUT power
15W
 
     
 
CAM Series
Designed for imaging equipment
1 standard model +
custom design solutions upon request
 CAM Series - non instrumented high Voltage Power Supplies in Block Configuration
DESCRIPTION
This custom series is made up of high voltage power supplies fitted with full remote command and control through external voltage sources. These compact converters' casings ensure a high EMC level.
As an example, the characteristics of a -15kV power supply for streak camera is given in the datasheet.
Example of Custom Made Product :
INPUT VOLTAGE
24Vdc
OUTPUT VOLTAGE
0 to -15kV
CAM Series PDF(609 Ko)
CAM Series, get a quote here
OUTPUT power
7.5W
 
CCPS Series
Capacitor charging module
1 standard model +
custom design solutions upon request
 CCPS Series - High Voltage Power Supplies in Block Configuration
DESCRIPTION

This line of high voltage power supplies is used to load capacitors at constant current levels. They provide highly reliable outputs. They can be fitted in blocks with inputs and outputs only, or made into stand alone units that can be controlled either manually or through remote controls. It is equipped with automatic protection against overload, short circuit and arc.
As an example, the characteristics of a 150nF/+25kV/2mA power supply is given in the datasheet.
Example of Custom Made Product :
INPUT VOLTAGE
24Vdc
OUTPUT VOLTAGE
through
+2.5kV to +25kV
CCPS Series PDF (539 Ko)
CCPS Series, get a quote here
CHARGING POWER
25J/s
 
TS SERIES
Compact and modular triple output DC-AC high voltage power supply
1 standard product
 GPC Series - High Voltage Power Supplies in Block Configuration
POSSIBLE APPLICATIONS
Corona wire polarisation
Standard Range Electrical Characteristics
INPUT VOLTAGE
24Vdc
OUTPUT VOLTAGE
Vout1 : +6500V
Vout2 : -8500V
Vout3 : 4600Vrms
Iout1 : 1.0mA
Iout2 : 2.8mA
Iout3 : 1.0mA
TS Series PDF (323 Ko)
TS Series, get a quote here
 
DEPOLLUTION SERIES
Compact and modular DC-AC high voltage power supply
2 standard products
 DEPOLLUTION Series - High Voltage Power Supplies in Block Configuration
POSSIBLE APPLICATIONS
Corona wire polarisation
Standard Range Electrical Characteristics
INPUT VOLTAGE
Vout : 3300Vrms or 5000Vrms
OUTPUT VOLTAGE

Iout : 1mA
DEPOLLUTION Series PDF (323 Ko)
DEPOLLUTION Series, get a quote here
 
hdc Series
High power high voltage compact power supply
60 standard models +
custom design solutions upon request
 HDC Series - High Voltage Power Supplies in Block Configuration
POSSIBLE APPLICATIONS
General Purpose Applications
Standard Range Electrical Characteristics :
INPUT VOLTAGE
24Vdc
OUTPUT VOLTAGE
through
0 to ± 1000V
0 to ± 8000V
HDC Series PDF (153 Ko)
HDC Series, get a quote here
OUTPUT power
30W, 50W or 100W
IDC SERIES
Medium power high voltage compact power supply.
48 standard models +
custom design solutions upon request
 IDC Series - High Voltage Power Supplies in Block Configuration
POSSIBLE APPLICATIONS

- General Purpose Applications

Standard Range Electrical Characteristics :
INPUT VOLTAGE
24Vdc
OUTPUT VOLTAGE
through
0 to 10kV
0 to 25kV
IDC Series PDF
IDC Series, get a quote here
OUTPUT power
5W, 10W or 20W
Click on any one of the items below to download the complete data sheet(s) in Adobe PDF format. Although we try to maintain our information as up-to-date as possible, the indicated specifications are subject to change without notice. To request information regarding delivery schedules, prices or for any other subject of interest for you, please fill out the form CONTACT US.

Regarding our custom made products: if a standard product does not meet your needs, SDS can modify an existing product or develop a new design, depending on our technical capabilities and your budget. Above you will find either the electrical specifications of a well defined product line, or examples of custom made power supplies .